Full form, Technical terms, abbreviations, कम्प्युटर सम्बन्धित केही संक्षिप्त तथा पुरा रूपहरू

कम्प्युटर सम्बन्धित केही संक्षिप्त तथा पुरा रूपहरू

Computer related technical terms and abbreviations: (Short form : Full Form)

ACER - Acquisition Collaboration Experimentation Reflection.
ADSL - Asymmetric Digital Subscribe Line.
AMOLED - Active-matrix organic light-emitting diode.
AMR- Adaptive Multi-Rate.
APK - Authenticated public key.
APN - Access Point Name.
ATM - Automated Teller machine.
CDMA - Code Division Multiple Access.
CMOS - Complementary Metal Oxide Semiconductor
COM - Computer Output Microfilm
COMPUTER - Common Oriented Machine Particularly United and used under Technical and Educational Research.
DAT - Digital Audio Tape
DELL - Digital electronic link library.
DIVX - Digital internet video access.
DLNA - Digital Living Network Alliance.
DNSE - Digital natural sound engine.
DTP - Desk top publishing.
DVD - Digital Versitle Disk.
EDGE - Enhanced Data Rates for Globa Evolution.
ESN - Electronic Serial Number.
FSSAI(Fssai) - Food Safety & Standards Authority of India.
GOOGLE - Global Organization Of Oriented Group Language Of Earth.
GPRS - General Packet Radio Service.
GPS - Global Positioning System.
GSM - Global System for Mobile Communications.
HDMI - High-Definition Multimedia Interface.
HP - Hewlett Packard.
HS - HOTSPOT.
HSDPA - High speed down-link packet access.
HSPA - High Speed Packet Access.
HSUPA - High-Speed Uplink Packet Access.
IFSC - Indian Financial System Code.
IMEI - International Mobile Equipment Identity.
ISP - Internet Service Provider.
IVRS - Interactive Voice Response System.
J2ME - Java 2 micro edition.
LCD - Liquid Crystal Display.
LED - Light emitting diode.
MMS - Multimedia Message Service.
MODEM - Modulator-Demodulator.
MPEG - moving pictures experts group.
NFC - Near field communication.
OLED - Organic light-emitting diode.
OS - Operating system.
OTG - On-the-go.
OVI - Ohio Video Intranet.
P.O.I - Point of interest.
PAN - permanent account number.
PDF - portable document format.
PPI - Pixels Per Inch.
QVGA - Quarter Video Graphics Array.
RAM - Random access memory.
ROM - Read only memory.
RSS - Really simple syndication.
SIM - Subscriber Identity Module.
SIS - Installation source.
S-LCD - Super Liquid Crystal Display.
SMS - Short Message Service
SNS - Social network service.
STD - Subscriber Trunk dialling.
TAX - Trunk Automatic Exchange
TFT - Thin film transistor.
UMTS - Universal Mobile Telecommunicati ons System.
UPS - Uninterruptible power supply.
USB - Universal serial Bus.
VGA - Video Graphics Array.
VIRUS - Vital Information Resources Under Siege.
VPN - Virtual private network.
WCDMA - Wide-band Code Division Multiple Access.
Wi-Fi - Wireless fidelity.
WINDOW - Wide Interactive Network Development for Office work Solution.
WLAN - Wireless Local Area Network.
WVGA - Wide video graphics array.
WXGA - Widescreen Extended Graphics Array.
XML - Extensible Markup Language
YAHOO - Yet Another Hierarchical Officious Oracle.

Full form of some words
News paper = _North East West South past and present events report._
Chess = _Chariot, Horse, Elephant, Soldiers._
Cold = _Chronic Obstructive Lung Disease._
Joke = _Joy of Kids Entertainment._
Aim = _Ambition in Mind._
Date = _Day and Time Evolution._
Eat = _Energy and Taste._
Tea = _Taste and Energy Admitted._
Pen = _Power Enriched in Nib._
Smile = _Sweet Memories in Lips Expression._
etc. =_End of Thinking Capacity_
OK =_Objection Killed_
Or =_Orl Korec (Greek Word)_
Bye = Be with you Everytime.

विन्डोज_कीबोर्ड_शर्टकट :: Windows keyboard shortcuts

#विन्डोज_कीबोर्ड_शर्टकटः

➤ CTRL+A = सेलेक्ट अल
➤ CTRL+C = कपी
➤ CTRL+D = डिलेट
➤ CTRL+P = प्रिन्ट
➤ CTRL+S = सेभ
➤ CTRL+V = पेस्ट
➤ CTRL+X = कट
➤ CTRL+Y = रिपिट
➤ CTRL+Z = अन्डू
➤ DELETE = डिलेट
➤ F1 = हेल्प
➤ F2 = रिनेम
➤ F3 = सर्च
➤ F4 = एड्रेसबार लिस्ट
➤ F5 = रिफ्रेश एक्टिव विन्डो
➤ F10 = एक्टिभेट मेनूबार
➤ SHIFT+DELETE = डिलेट (रिसाईकिलमा नराख्ने गरि)
➤ CTRL+RIGHT ARROW = कुनै शब्दको अगाडी राख्नु
➤ CTRL+LEFT ARROW = कुनै शब्दको अगाडी राख्नु
➤ CTRL+DOWN ARROW = कुनै प्याराग्राफको तल अगाडी राख्नु
➤ CTRL+UP ARROW = कुनै प्याराग्राफको अगाडी माथि राख्नु
➤ ALT+ENTER = सेलेक्टेड आइटमको प्रोपर्टी
➤ ALT+F4 = एप्लीकेशन विन्डो बन्द गर्नु
➤ ALT+SPACEBAR = एक्टिव विन्डोको शर्टकट मेनू
➤ CTRL+F4 = डाकुमेन्ट विन्डो बन्द गर्नु
➤ ALT+TAB = खुलेको आइटम्सको बीच स्विच गर्नु
➤ ALT+ESC = Cycle जुन क्रममा विन्डोस खुलेको छ।
➤ CTRL+ESC = स्टार्ट मेनू
➤ BACKSPACE = ब्याक गर्नु
➤ ESC = क्यान्सिल टास्क, ब्याक
➤ SHIFT जब DVD हाल्छ = अटोरनलाई रोक्नु
➤ TAB = अगाडी बढाउँनु
➤ SHIFT+TAB = फोकस पछी गर्नु
➤ Window = स्टार्ट मेनू
➤ window+BREAK = सिस्टम प्रोपर्टी
➤ window+D = डेस्कटप
➤ window+M = मिनिमाईज अल
➤ window+Shift+M = रिस्टोर आल
➤ window+E = माइ कम्प्युटर
➤ window+F = सर्च
➤ CTRL+ window+F = सर्च कम्प्युटर
➤ window+ L = स्विच यूजर
➤ window+R = रन डायलोग बक्स
➤ window+U = यूटिलिटी मेनेजर
❖Windows Explorer
➤ END = एक्टिव विन्डोको बटम
➤ HOME = एक्टिव विन्डोको टप
➤ NUM LOCK+ = सेलेक्टेड फोल्डरको सबै सबफोल्डर
➤ NUM LOCK+ numeric keypad (+) = सेलेक्टेड फोल्डरको कन्टेन्ट
➤ NUM LOCK+numeric keypad (-) = कोलेप्स सेलेक्टेड फोल्डर
➤ LEFT ARROW = कोलेप्स सेलेक्शन
➤ RIGHT ARROW = डिस्प्ले कोलेप्सड ।।।

कम्प्युटर सम्बन्धी केही साधारण Tips & Tricks हरु

कम्प्युटर सम्बन्धी केही साधारण Tips & Tricks हरु:-

१ माउसको काम कि बोर्डले गर्नुहोस्
यदि कुनै बेला तपाईंको माउसले काम गरेन भने के गर्नु हुन्छ ? तपाईंहरुलाई थाहा छ माउसको काम कि-बोर्डले पनि गर्न सकिन्छ ? त्यसको लागि Shift+Alt+NumLock कि थिच्नुस् र र ok गर्नुहोस् । अब तपाईंले माउसको काम Number key हरुबाट गर्न सक्नु हुन्छ ।

२ कम्प्युटरको password बिर्सनु भयो भने यदि तपाईंले आफ्नो कम्प्युटरको password बिर्सिनु भयो भने यो step प्रयोग गरेर आफ्नो कम्प्युटर खोल्न सक्नु हुन्छ कम्प्युटर on गर्नुस् password Enter गर्ने ठाउँ देख् नु हुनेछ
अब Ctrl+Alt+Delete कि थिच्नुस् । username लाई Change गरेर administrator राखिदिनुस् र ok गर्नुस् ।

३ कम्प्युटरलाई छिटो ShuttDown गर्ने तरिका
सबै भन्दा पहिला Ctrl+Alt+Delete थिच्नुस् Task Manager खुल्नेछ
ShuttDown Tab मा क्लिक गर्नुस्
Ctrl कि लाई press गरेरै Turn Off मा क्लिक गर्नुस्

४ आफ्नो कम्प्युटरको सम्पूर्ण जानकारी
यदि तपाईंलाई आफ्नो कम्प्युटर बारे सम्पूर्ण जानकारी थाहा छैन र त्यो जान्न चाहनु हुन्छ भने, Start > Run मा क्लिक गर्नुस् र त्यहा Command टाईप गर्नुस् Command पेज खुल्नेछ अब त्यहा systeminfo टाईप गरेर Enter गर्नुस् । अब तपाईंले आफ्नो कम्प्युटरको सम्पूर्ण Details हेर्न सक्नुहुनेछ ।

५ आफ्नो कम्प्युटरलाई Fast गराइराख् न चाहनु हुन्छ भने,
यदि तपाईंको कम्प्युटर Slow चल्छ र यसलाई Fast गराउन चाहनु हुन्छ भने यि कुराहरुलाई याद राख्नुस्
आफ्नो कम्प्युटरको C Drive मा धेरै फाइलहरु Save नगर्नुहोस् र सके सम्म C Drive को क्षमता 50% Free
नै होस् ।
Desktop मा धेरै फाइलहरु राख् ने नगर्नुस् यसले तपाईंको कम्प्युटरको Ram त्यसमा Use भई राखेको हुन्छ र कम्प्युटर slow चल्छ ।
कम्प्युटरमा काम सकिसकेपछि ShutDown गरेर मात्र off गर्ने गर्नुस ।

६ कम्प्युटरको Virtual Memory बढाउने तरिका
तपाईंको कम्प्युटरको Virtual Memory कम भएर पनि कम्प्युटर slow चलेको हुन सक्छ , तपाईंले Virtual
Memory लाई बढाउन सक्नु हुन्छ My computer Icon लाई Right क्लिक गर्नुस् र properties मा जानुस् Advance Tab मा क्लिक गर्नुस्
Performance को Settings मा क्लिक गर्नुस्
त्यस भित्रको Advance Tab मा क्लिक गर्नुस्
Virtual Memory को change icon मा क्लिक गर्नुस्
र Virtual Memory reset गर्नुस्
कम्प्युटरलाई restart गर्नुस्

७ Network Connection को full Detial को लागि Start > Run र त्यहा ncpa.cpl टाईप र Enter गर्नुस् तपाईंको कम्प्युटरमा भएको Network connection हरुको पेज खुल्नेछ ।

८ कम्प्युटरको System properties हेर्नको लागि
shortcut key
Windows कि + Pause/Break कि थिच्नुस्

९ MsWord को फाइललाई password ले लक गर्न
चाहनु हुन्छ भने,
यदि तपाईं MsWord मा टाईप गरेको documant लाई अरुले नहेरोस भन्ने चाहनु हुन्छ भने त्यसलाई आफ्नो password राखी लक गर्न सक्नु हुन्छ , त्यसको लागि MSWord को Tool बारको Tools मा क्लिक र Option मा क्लिक गर्नुस्
अब Security मा क्लिक गर्नुस् र Password to open भन्ने box मा आफुले चाहेको password राख्नुस् > ok > password लाई conform गर्नुस् र ok अब तपाईंले आफ्नो document लाई save गरिदिनुस् ।

HOW TO Stop Body Odor Naturally

HOW TO Stop Body Odor Naturally... 

Millions of people suffer from embarrassing body odor. Fortunately, you don't need to spend a lot to solve the problem. Natural, 'green', cheap baking soda can solve your personal odor issue!

Instructions 

Step 1 - DEODORANT

If your deodorant isn't able to stop body odor effectively for you, you don't have to buy a more expensive brand. Simply apply a slightly heavier coat of deodorant than normal. Then, apply baking soda on top of that layer, like you were applying baby powder. Be careful not to inhale baking soda. It's not toxic, but any lung contaminate can result in respiratory problems. 

Step 2 - BAD BREATH

Try adding baking soda to your toothpaste, or purchase a toothpaste with baking soda as an ingredient. You can also mix half a teaspoon of baking soda with your mouthwash and use it to swish and gargle. 

Step 3 - HAIR

Your hair traps odors and oils produced by your scalp. In fact, more body heat is released through your head than through any other part of your body. These oils not only look bad, but carry an unpleasant odor too. 

Try adding a touch of baking powder to your grooming routine. In the shower, after washing and conditioning, mix a small amount of baking soda (2 tbs approximately) with enough water to create a paste. Apply this paste to your hair and massage in thoroughly. Allow to sit for 3 minutes, then rinse. Your hair may feel slick even after rinsing. This is because a small amount of baking soda will cling to your hair, helping to absorb odors throughout your day.

***NOTE*** If you are in a situation where showering is not an option, baking soda can be applied directly to your hair and combed through for a similar effect. Do not mix the baking soda with any water. Again, be careful not to inhale baking soda. 

Step 4 - SHOES

You are probably aware that baking soda is a common additive to innersoles and other shoe inserts. However, you don't need to purchase the insert to have the same odor fighting effects.

Pour enough baking soda into your shoes to coat the inner sides. Spread the baking soda on all inner sides of the shoe as though you were coating a baking pan with flour. Allow soda several hours to absorb odors. Then, turn shoe upside down over a trash bin and pat with your hand to remove excess powder. Repeat as often as you need to keep up with foot odor. 

Step 5 - LAUNDRY

Adding baking soda to your laundry will help stop body odor. This method works best with natural fibers like cotton, denim blue jeans, linen. 

WASH METHOD ~ Wash clothes as normal with regular detergent, but add 1/4 cup baking soda to the wash.

DRYER METHOD ~ Wash clothes as usual. Moisten a clean washcloth, sprinkle with 2 tablespoons of baking soda. Add the washcloth to the load in your dryer. Dry as usual. ***This method works best for ongoing prevention of body odor*** 

Step 6 - BATH

There are many benefits to adding soaking in a a baking soda bath. It will help relieve skin irritation, moisten your skin, relieve itch. It will also help fight odor.

Add 2 tablespoons of baking soda to a comfortably warm bath.

Step 7 - HAND ODOR

If you are one of many people who find that any odor your hands come in contact with is difficult to wash away, baking soda is the answer. Baking soda is highly effective in removing unpleasant smells like onion and garlic. Simply wet your hands, apply baking soda liberally, scrub, rinse. Odor is gone.

Tips & Warnings

- If skin irritation develops, discontinue use of baking soda.

- If you have existing skin conditions, consult your doctor before using baking soda in any of the methods described in this article.

- Do not expose eyes to baking soda.

- Do not inhale baking soda.

Windows 2000 Professional Installation

From: Sigdel, Dhruba R
Sent: Wednesday, June 04, 2008 8:37 AM
To: 'fewa.blogsome.com'
Subject: Windows 2000 Professional Installation

Windows 2000 Professional Installation
The following are the installation requirements for a Windows 2000 Professional workstation:

• 133 MHz or higher Pentium-compatible processor
• 64MB minimum; 4GB maximum)
• 2GB hard drive with a minimum of 650 MB of free space(Additional free hard disk space is required if you are installing over a network).
• Windows 2000 Professional supports up to 2 processors.

Always check the HCL before beginning any installation. Installations can be created on any type of partition-FAT, FAT32, or NTFS. NTFS is recommended, but use FAT or FAT 32 for dual booting. Upgrades can be performed on Windows 9x machines and NT 3.51 and higher OS's. To upgrade a Windows 3.1 or NT 3.5, first upgrade to Windows 9x or NT 4.0, respectively. To install over a network, install a distribution server first. Slipstreaming is the ability to install Windows 2000 and the service packs at the same time, and can be done using a distribution image for many computers. There are four logs for troubleshooting failed installations: Setupact.log, Setuperr.log, Setupapi.log and Setuplog.txt.

The following table lists some of the common switches available for use with WINNT.EXE

WINNT.EXE:
/e: command	Executes a command before the last phase of setup.
/r: foldername	Creates an additional folder in the folder where the Windows 2000 files are installed. The folder IS NOT DELETED after Setup finishes. You can use additional /r switches to install additional folders.
/rx: foldername	Creates a folder to be copied as a part of setup - into the Windows 2000 directory, but the folder IS DELETED as setup finishes.

Use Winnt32.exe for a clean installation or upgrade from Windows 9.x or NT Workstation. There are a number of switches that can be used with winnt32.exe. Below are a couple of the important ones:

WINNT32.EXE:
/copydir: foldername	Creates an additional folder in the folder where the Windows 2000 files are installed. The folder IS NOT DELETED after Setup finishes. You can use additional /r switches to install additional folders. Same as /r for winnt.exe.
/copysource: foldername	Creates a folder to be copied as a part of setup - into the Windows 2000 directory, but the folder IS DELETED as setup finishes. Same as /rx for winnt.exe.
/cmd:	Executes a command before the last phase of setup. Same as /e: for winnt.exe.
/cmdcons	Installs the appropriate files to restart the system in command-line non-graphical mode for repair purposes.
/syspart	Prepares a hard disk to be transferred to another computer system. This switch installs setup files and marks the partition active. Requires the use of /tempdrive switch.
/tempdrive	Specifies which drive to install Windows 2000 temporary files during setup.
/makelocalsource	Copies all of the Windows 2000 source files to the target drive during installation.
/noreboot	Avoids reboot after installation so that another command can be run.
/checkupgradeonly	Checks your system for incompatibilities that will prevent a successful upgrade.
/unattend	Upgrades your previous version of Windows by using unattended Setup mode. All user settings are taken from the previous installation so that no user intervention is required during Setup. You can also use this command in an unattended installation by specifying the [seconds][:answer_file] variables.

Windows 2000 Professional supports unattended installations. The /U switch is used for unattended installations and is followed by the location of the answer and installation files. Unattended installations can be done for clean installs as well as upgrades. Unattended installations can be fully automated. The default answer file that ships with Win2K is called unattend.txt and can be modified. Setup Manager can also create answer files. For more in depth information about unattended installations, read our tutorial Windows 2000 Unattended Installations.

Windows 2000 comes with a variety of tools that can be helpful during installations. Understand the following concepts:

• Disk duplication is used when the computers have identical hardware configurations, and is only used for clean installs.
• Sysprep is used when you need to prepare an image of a computer for cloning but does not provide the actual distribution of this image. That is done with third-party tools.
• To use Remote Installation Service(RIS), there must be DHCP server service, DNS server service, and AD running on the network.
• Scripting is used when computers have different hardware configurations and when disk duplication cannot be used. Answer files offer information that is normally manually input into installation dialog boxes like user name, password, domain name, time zones, etc.

Windows 2000 Professional Backup and Recovery

From: Sigdel, Dhruba R
Sent: Wednesday, June 04, 2008 8:44 AM
To: 'nepalifren.blogspot.com'
Subject: Windows 2000 Professional Backup and Recovery

Recovery Console:
Now that you have installed Windows 2000, you should immediately take steps to protect your installation by installing the Recovery Console. Recovery Console is similar to the emergency repair disk in NT 4.0, but with many functionality enhancements. Recovery Console will allow you to You can start and stop services, read and write data on a local drive (including drives formatted with the NTFS file system), copy data from a floppy disk or CD, format drives, fix the boot sector or master boot record, and perform other administrative tasks. With Windows NT 4.0, many administrators would create a FAT partition that would allow them to boot to a DOS prompt. The recovery console eliminates the need to create a FAT partition for this purpose.

Recovery Console is set up as follows:
Insert the installation CD and switch to the I386 directory. Type C:\>winnt32 /cmdcons. When asked for confirmation, answer "yes". The file will be copied to the hard disk. After rebooting the computer you will be able to select "Microsoft Windows 2000 Command Console" and start Windows 2000 in command mode. You will be prompted for a Windows 2000 installation that you wish to repair and will be prompted for the Adminstrator password. Once you are in, there is a wide variety of commands that you will be able to perform. Type HELP for a list of all of the commands. Some of the more important commands are:

• DISKPART - Similar to fdisk
• LISTSVC - Lists services
• ENABLE/DISABLE - Enable/disable service or driver
• FIXBOOT - Create a new boot sector on the system partition
• FIXMBR - Repairs master boot record
• MAP - Shows a list of drives and ARC paths.
• LOGON - Choose which installation to work with

Backup:
The Backup program has been greatly enhanced in order to support Active Directory and a much wider variety of backup media including removable disks, network drives, logical drives and tape devices are now supported. Another nice feature is that an integrated scheduling option has been added which relieves the need to use AT or other scheduling utility. For more in depth information on backing up Windows 2000, read our tutorial Backing Up and Restoring Windows 2000.
Other:
Windows 2000 has several other utilities to aid in the event of a failure, many of which are included in "Advanced Options" which are accessed by pressing F8 at the boot menu. In order to troubleshoot failures, it is a good idea to understand the boot process which occurs in the following steps:

1. Power-on self test (POST)
2. Initial startup
3. Bootstrap loader process
4. Select operating system
5. Detecting hardware
6. Selecting a configuration
7. Loading and initializing the kernel(Ntoskrnl.exe)
8. Log on

The boot process requires the following files:

File	Location
NTLDR	Active Partition
Boot.ini	Active Partition
Ntdetect.com	Active Partition
Ntoskrnl.exe	%SystemRoot%\System32
Hal.dll	%SystemRoot%\System32
SYSTEM key	%SystemRoot%\System32\Config
Device drivers	%SystemRoot%\System32\Drivers

Ntbootdd.sys is required only if you are using a SCSI-controlled boot partition, and the SCSI adapter does not have a SCSI BIOS enabled. Bootsect.dos is required only for multiple booting.

When working with the boot.ini file, you need to understand ARC naming conventions. ARC is an architecture-independant way of naming drives for x86, risc, alpha, etc. NT uses this convention in its boot.ini file to determine which disk holds the OS. The table below will explain the different options.

Multi(x)	Specifies an EIDE disk or a SCSI disk if the bios is enabled to detect it. Can only be used on x86 systems. "x" is the number of the controller.
SCSI(x)	Defines a SCSI controller if the BIOS is not enabled to do so. Again, "x" is the number of the controller.
Disk(x)	Defines which SCSI disk the OS is on. If SCSI(x) was used then x=the SCSI ID of the drive. If Multi(x) was used then x=0.
Rdisk(x)	Defines disk which the OS is on when it is on an EIDE disk. x=0-1 if on primary controller. x=2-3 if on multi-channel EIDE controller.
Partition(x)	Specifies the partition that the operating system is located on. (x)=the partition's number.

Below are the various recovery tools included in Windows 2000.

·  ERD - Emergency Repair Disk. The RDISK utility found in NT 4.0 is gone. An ERD is now created using the ntbackup utility and no longer backs up registry data.

·  Enable VGA Mode - Located in the advanced options menu, this utility allows one to fix display settings or drivers that have caused the display to become unviewable.

·  Last Known Good Configuration - Tells Windows 2000 to forget any changes that you have made since the previous boot, by looking for the last configuration that did not cause system critical errors at boot. Good to try if you have made a change to the system and then rebooted with problems.

·  Safe Mode - Loads a minimal version of Windows 2000 with only the drivers needed to boot the computer. Because this option does not load any network services or drivers, it is a good tool to use when you suspect that the problem lies in this area.

·  Safe Mode With Networking - Same as Safe Mode, but includes networking support.

·  Safe Mode With Command Prompt - Safe Mode in which EXPLORER.EXE is replaced by CMD.EXE. From the command prompt it is still possible to run Explorer and other GUI applications from a command line. No networking support in this mode.

Common Codes for Nokia-CDMA

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

CDMA Mode : *#7738#

Message sending options: *#66767#

Esn Number: *#92772689#

Current Channel: *#24#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#3872#

Esn/Data/Timer: *#92772689#

SID: *#743#

Help: *#4357#

Slot Cycles: *#75681# , *#75682#

Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

1) Turn on the phone. Press *3001#12345#

2) Select Field Test and enable it..

3) Exit from NAM.. and restart your phone..

4) you will observe a new menu " Net Monitor "..

5) type appropriate group/display code.. ( 3101 for link info, 6101 for battery info )

6) enter 0000 to back.

Common Codes for SAMSUNG (GSM)

Software version: *#9999#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#
Vibration test: *#9998*842# - *#8999*842#
Alarm beeper - Ringtone test : *#9998*289# - *#8999*289#
Smiley: *#9125#
Software version: *#0837#
Display contrast: *#0523# - *#8999*523#
Battery info: *#0228# or *#8999*228#
Display storage capacity: *#8999*636#
Display SIM card information: *#8999*778#
Show date and alarm clock: *#8999*782#
The display during warning: *#8999*786#
Samsung hardware version: *#8999*837#
Show network information: *#8999*638#
Display received channel number and received intensity: *#8999*9266#

*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error LOG Menu
*#8999*327# EEP Menu
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

Type in *#0000# on a Samsung A300 to reset the language
Master reset(unlock) #*7337# (for the new samsungs E700 x600 but not E710)
Samsung E700 type *#2255# to show secret call log (not tested)
Samsung A300, A800 phone unlock enter this *2767*637#
Samsung V200, S100, S300 phone unlock : *2767*782257378#

#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset

Note: Try these codes at your own risk!  Some of these codes may not work.

Nokia Mobile Phone Unlock & Hidden Feature codes

#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

NOTE: There are many websites and applications which claim to generate unlocking codes for Nokia phones for free, I don’t know if they work but you can certainly try them at your own risk:

• http://www.trycktill.com/eng/unlock_swe.asp
• http://www.download.com/NokiaFree-Unlock-Codes-Calculator/3000-2641_4-10500223.html
• http://www.peters1.dk/webtools/nokia/nokia.php?sprog=en
• http://nfader.z-host.ru/
• http://unlock.nokiafree.org/

Samsung E720,E730,D500 secret codes

Following codes are for D500, it might work for e720/E730 (though it is dependent on phones firmware).

*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together

*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don’t Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables

#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen

#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps

#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*364# Watchdog ON/OFF
#*8370# Tfs4.0 Test 0

#*36245# Turns Email TestMenu on.

*2767*22236245# Email EPP set (….)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email…

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera Reset
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

**NB:*#8999*228# or *#9998*228# will show you how much charge the battery has in %. It even gives the temperature.